D1 Mini Pro NodeMCU WiFi LUA ESP8266 ESP-12 WeMos Microcontroller w/ Antenna US

Description: D1 Mini Pro Microcontroller WeMos, NodeMCU and Arduino compatible LUA ESP8266 ESP-12 Wifi Development Board with External Antenna The D1 Mini Pro is an Arduino-compatible microcontroller based on the WiFi-SoC ESP8266EX and is made for fast Internet-of-Things (IoT) prototyping. It offers the convenience of a micro-USB connection for both power and data (running at 3.3V), and despite its size has built-in WiFi with an external antenna for greater transmission distances, and 16MB of flash memory. It can be programmed with Arduino or LUA, and supports both serial and OTA programming. The development board is based on the WiFi-SoC ESP8266EX and is made for fast Internet-of-Things (IoT) prototyping. It is flashed with the NodeMCU firmware and can be set up and programmed right away with the on-board microUSB connection. With only few lines of code the NodeMCU Dev Kit is connected to your local network and ready to be controlled by other network members like computers and smartphones. D1 Mini Pro Microcontroller Features and Specifications: Microcontroller: ESP-8266EXOperating Voltage: 3.3V Max (5V power from MicroUSB connector is internally converted to 3.3V) Digital I/O Pins: 11, all pins have interrupt/PWMI2C/one-wire support except D0Analog Input: 1 (3.2V max input)Connector: MicroUSBClock Speed: 80MHz/160MHzFlash: 16M bytesUSB Interface: CP2104 USB-TO-UART ICAntenna: Built-in ceramic antenna and connector for external U.FL antenna (included)Dimensions: 34mm x 25.5mm x 3.6mm excluding antenna Weight: Approx. 2.5g excluding connectors and external antennaSame dimensions as D1 Mini, but lighterCompatible with Arduino, Nodemcu and MicroPython This D1 Mini comes with 3 different types of header connectors to support various configurations: FemaleMaleFemale/Male (long female)In most cases, the female headers are the best choice as they allow you to install the various shields that are available. NOTE: There is a "Zero Ohm" jumper connecting the circuitry to the internal ceramic antenna. In order to use the external antenna, you must desolder this resistor, rotate it 90 degrees to connect the circuitry to the external antenna, and resolder it. Or simply remove it, and solder a jumper wire in its place. Please see the Envistia Mall support page for this product for more details on this procedure. Compared to the D1 Mini, the D1 Mini Pro offers: Flash: 16M bytes (128M bits) in the D1 Mini Pro vs 4M bytes (32M bit) in the D1 MiniUSB-TO-UART IC: CP2104 vs CH340GAntenna: Built-in ceramic antenna or an external antenna vs a PCB antenna in the D1 MiniWeight (without pins): 2.5g vs 3.9gThickness: 3.6mm vs 6.7mmPackage Includes:1x D1 Mini Pro ESP8266 ESP-12 WiFi Development Board NodeMCU LuaTwo each Female, Male, and Female/Male (long female) connectorsExternal WiFi AntennaLink to online installation and operation instructions Complete your development with our D1 Mini Shields:ProtoBoard Double Sided Perf Board Prototyping ShieldMicro SD TF Card ShieldDHT11 Temperature And Humidity Shield1-Button ShieldI2C TB6612FNG Dual Motor Driver ShieldBMP180 Barometric Pressure and Temperature ShieldSHT30 Temperature and Humidity Measurement I2C ShieldRelay ShieldBattery Charging and Boost Power Supply Shield Get it faster! Stocks and ships from our US Colorado office for quick delivery. Contact us for quantity/OEM pricing. We provide FREE USPS First Class Shipping with Tracking - Not Economy Shipping

Price: 11.89 USD

Location: Fort Collins, Colorado

End Time: 2023-09-24T12:12:47.000Z

Shipping Cost: 0 USD